EOS-S3 Thing+ Notes 5/20/2023

This post is part of a series of notes I originally recorded on a GitLab wiki for our QuitetThing project with can be found here: 

https://gitlab.com/mccormjf/quietthing/-/wikis/home 


Ran the following commands to start the Docker services on startup:

sudo systemctl enable docker.service sudo systemctl enable containerd.service

Added git clone of f4pga-arch-defs to Dockerfile_F4PGA. I believe I cloned it while inside the container last time.

The commands to build the tests are located here: https://github.com/f4pga/f4pga-arch-defs/tree/main/quicklogic

Our chip corresponds to the chandalar board.

This is the command I used to build a openocd loadable version of the counter test:

make counter-ql-chandalar_openocd

Comments

Post a Comment

Popular posts from this blog

EOS-S3 Thing+ Debug Setup 8/27/2023

We can now pause and resume a program running on the Thing+ in VS Code using GDB, Black Magic, and Cortex Debug. I found the template for the Black Magic config here: https://github.com/Marus/cortex-debug/wiki/Black-Magic-Probe-Specific-Configuration I modified it to fit out situation and uploaded it to the repo. To setup, you need to not have the jumpers on the Thing+ and open Black Magic in a terminal. Then select BMP Debug from the dropdown debug menu in VS Code and then press F5 to start the debug session. If it doesnt connect or attach, try to connect to the Thing+ outside of VS Code with Blackmagic and GDB. You may need to unplug the Thing+ or I found putting it into program (green flashing) mode and then connecting to in from GDB in the Terminal helped and I was then able to connect through VS Code. To set breakpoints, you can click on a line of a file that is part of the same project and folder structure as the elf you are running on the board. I wasnt able to set a brea...
Read more

Escape to the Northern Lights

Northern Lights Have you ever wanted to see the Northern Lights in its full glory? My friends and I decided to journey to Iceland in November and it's the event I am most looking forward to this year. We have been planning this trip since early 2023 and as we get closer, it's becoming more real. I've seen the Northern Lights in movies and pictures, but I can only imagine how breathtaking it will be in person. This phenomenon makes me think of a doorway to a different universe. For someone who grew up on science fiction, this experience will be like a fantasy realized. Travel Planning I am also looking forward to the country itself and traveling with friends I don't see very often. Exploring new places and trying new cuisines are two of my favorite things, and doing both with friends is just the icing on the cake. We plan to see the whole island in about 12 days, driving along the perimeter and stopping at various sights along the way. We are preparing for this trip b...
Read more

EOS-S3 Thing+ Debug Setup 8/20/2023

There is an extension for VS Code called Cortex-Debug, using the below links I have made a first pass at developing an OpenOCD launch.json file for debugging the Thing+. Cortex Debug requires gdb version 9 or above, but the version that comes with qorc is 8.x. I downloaded version 10.x from the arm link down below. I tried the most recent version ( 12.x at the time of this writing) but it had some python error that is describe in the stackoverflow link. Cortex Debug also needs a SVD file which QuickLogic doesnt provide, but there is one someone made at the eos-s3-rs repo. It is not fully featured but is a great start. https://lonesometraveler.github.io/2020/03/27/debug.html https://www.digikey.com/en/maker/projects/raspberry-pi-pico-and-rp2040-cc-part-2-debugging-with-vs-code/470abc7efb07432b82c95f6f67f184c0 https://github.com/Josfemova/eos-s3-rs https://developer.arm.com/downloads/-/gnu-rm https://stackoverflow.com/questions/72187185/arm-none-eabi-gdb-cannot-start-because-of-some-pyt...
Read more